• (+591) (3) 3244394
  • ventas@speed.com.bo

Torqlite U.S.A

Torq / Lite ofrece la más diversa selección de llaves de torque hidráulicas disponibles, y continúa liderando el camino en el desarrollo de nuevas tecnologías. Diseñamos, fabricamos, montamos, y ponemos a prueba todas nuestras herramientas y a nosotros mismos a través de un proceso ISO 9001 en primer lugar, para asegurar que entregan un servicio fiable cuando y donde los necesite. Nuestra amplia experiencia en la industria de los pernos, combinado con la versatilidad de nuestra línea de productos, nos equipa para personalizar las herramientas y accesorios para satisfacer las necesidades específicas y los requisitos del proyecto.

PNEUMATICH MULTIPLIERS

High Speed Air - Harnessing the power of pressurized gas

The pneumatic series of tools provides the speed and power required to finish the job. A Torq/Lite® pneumatic torque wrench consist of a robust air motor driving a multiplier with three or more stages of epicyclic gearing. Torque control is achieved by adjustment of the air pressure. An air pressure versus torque graph and a calibration certificate is supplied with each tool and allows specific torque values to be set. For more critical applications, Pneumatic wrenches can be fitted with a torque transducer and the precise torque output displayed. The tool can then be shut off at the desired torque either manually or automatically using suitable control circuitry.

SU- XL Series - A time tested and proven tool design

The SU-XL Series of square drive hydraulic torque wrenches feature a patented design that reduces the number of moving parts and helps to eliminate “pinch points,” while improving tool accuracy. The robust yet lightweight aluminum body encloses the drivetrain assembly to ensure that nothing goes into or comes out of the tool. Select models offer a 48 X 48 Reaction System, for a total of 96 reaction positions. Capacities range from 100 to 60,000 foot-pounds of torque using a 10,000 psi hydraulic pump.

JN – Series - Another innovative breakthrough for serving the industry

The JN Series of hydraulic wrench was specifically designed to quickly, safely, and accurately tighten or loosen gas compressor piston rod crosshead jam nuts; however, the tool can be adapted to turn any nut affected by an obstruction through its center. The JN Series is distinguished by its patented “split-head” design that enables the tool to fit over any pipe or rod and around the nut to be turned. Capacities range from 100 to 38,000+ foot-pounds of torque using a standard bidirectional 10,000 psi hydraulic pump.

PNEUMATICH MULTIPLIERS

High Speed Air - Harnessing the power of pressurized gas

The pneumatic series of tools provides the speed and power required to finish the job. A Torq/Lite® pneumatic torque wrench consist of a robust air motor driving a multiplier with three or more stages of epicyclic gearing. Torque control is achieved by adjustment of the air pressure. An air pressure versus torque graph and a calibration certificate is supplied with each tool and allows specific torque values to be set. For more critical applications, Pneumatic wrenches can be fitted with a torque transducer and the precise torque output displayed. The tool can then be shut off at the desired torque either manually or automatically using suitable control circuitry.

POWER TOOLS

Electric Powered - Cost-effective and Reliable Performance

Resilient enough for some original units to still be in operation after over three decades, electric power consoles have been continually upgraded to deliver even more efficient and reliable service. The units are equipped with a 1-1/8hp, single-phase universal motor, producing a noise level of 90-95 dBA. They offer exceptional weight-to-performance ratio, and are CSA-rated for intermittent duty.

Air Power - When Air is the Preferred Source of Power

These units offer a powerful 3hp motor, and external adjustable pressure regulator, and a retractable side internal relief valve. They’re ideal for use with hydraulic torque wrenches, as well as for double- or single-acting tools.

Hydraulic Tensioner Pumps / Compact, Lightweight, and Excellent for Shipbuilding, Civil Engineering, and Heavy Industry Applications

With a pressure gauge and pressure switch as standard accessories, they feature automatic low- and high-pressure two-stage pumps that deliver very high performance. A 4.5L reservoir-type pump is the standard, but the units are also available with 2L or 7L reservoir-type pumps.

Galería

Cerrar menú