• (+591) (3) 3244394
  • ventas@speed.com.bo

Equializer TM International

HERRAMIENTAS PARA MONTAJE DE PIPING- VÁLVULAS Y BRIDAS

FLANGE SPREADING

The Equalizer™ range of patented flange spreading tools has been developed to assist in the spreading of all flange joint types including those with no access gaps between them.

6.0mm - 103.5mm Access Gap / SWi12/14TM Innovative mechanical flange spreading wedge

A simple solution to mechnically spreading flange joints with a minimum access gap of 6.0mm (0.25″). The SWi12/14TM Innovative Mechanical Flange Spreading Wedge provides a 30% higher spreading …

6.0mm - 103.5mm Access Gap / SWi20/25TE Innovative integral hydraulic flange spreading wedge

A simple solution to hydraulically spreading flange joints with a minimum access gap of 6.0mm (0.25″). The SWi20/25TE Innovative Hydraulic Flange Spreading Wedge provides a 30% higher spreading …

6.0mm - 103.5mm Access Gap / SWi20/25TI Innovative integral hydraulic flange spreading wedge

A simple solution to hydraulically spreading flange joints with a minimum access gap of 6.0mm (0.25″). The SWi20/25TI Innovative Integral Hydraulic Flange Spreading Wedge provides a 30% higher …

6.0mm - 81.0mm Access Gap / SW9TM Mechanical flange spreader wedge

A simple solution to mechanically spreading flange joints with a minimum access gap of 6.0mm (0.25″).

6.0mm - 81.0mm Access Gap / SW15TE Hydraulic flange spreader wedgee

A simple solution to hydraulically spread flange joints with a minimum access gap of 6.0mm (0.25″).

6.0mm - 81.0mm Access Gap / SW14.5TI Integral hydraulic flange spreading wedge

A simple solution to hydraulically spread flange joints with a minimum access gap of 6.0mm (0.25″).

2.0mm - 27.0mm Access Gap / MG7TM Mini-gap flange spreader

For use on smaller, lower pressure flange joints with a minimum access gap of 2.0mm (0.08″)If the flange joint you are working on has an access gap of 2.0mm and is of a smaller diameter and lower …

FLANGE ALIGNMENT

The Equalizer™ range of patented Flange Alignment tools can be used to align or re-align flange joints during pipework construction, commissioning or during routine maintenance.

The tool is attached to the flange joint where misalignment is at its greatest and then simply push and pull the flanges into correct alignment.

FA1TM Mechanical flange alignment tool

A simple solution to smaller diameter lower pressure flange joint misalignment.

6.0mm - 103.5mm Access Gap / FA4TM Mechanical linear & rotational flange alignment tool

A simple solution to medium diameter, medium pressure flange joint misalignment.

FA9TE Hydraulic linear & rotational alignment tool

A simple solution to large diameter high pressure flange joint misalignment.

FLANGE PULLING

The Equalizer™ Flange Closing Tool has been developed to pull flanges together during installation or maintenance. The FC10TE can be used on any flange with a bolt hole diameter of 22mm (7/8”) or greater.

FC10TE Hydraulic flange pulling tool

The FC10TE has been designed utilizing tandem hydraulic cylinders to create a very low profile, this allows the FC10TE to be used on small diameter flanges with limited access as well as larger…

NUT SPLITTING

for nuts 36mm to 50mm (across flats) / NS20TE External Hydraulic Nut Splitter

NS20TE External Hydraulic Nut Splitter…

for nuts up to 30 mm (across flats) / NS12TE External Hydraulic Nut Splitter

NS12TE External Hydraulic Nut Splitter

for nuts 23.0 mm to 36.5 mm (across flats) / NS15TE External Hydraulic Nut Splitter

NS15TE External Hydraulic Nut Splitter

for nuts 50mm to 65mm (across flats) / NS36TE External Hydraulic Nut Splitter

NS36TE External Hydraulic Nut Splitter

for nuts 65mm to 80mm (across flats) / NS50TE External Hydraulic Nut Splitter

NS50TE External Hydraulic Nut Splitter

PRECISION LIFTING

The Equalizer™ range of patented VLW18TE hydraulic & VLW18TI Integral Hydraulic Vertical Lifting Wedges has been developed to assist in the lifting of heavy equipment when access is restricted.

VLW18TE External hydraulic vertical lifting wedge

The VLW18TE Vertical Lifting Wedge uses an external hydraulic hose & hand pump allowing the tool to be operated a short distance away.

VLW18TI Internal hydraulic vertical lifting wedge

The VLW18TI Integral Vertical Lifting Wedge has a built in hydraulic pump allowing the tool to be used in confined areas. The sealed Integral hydraulic pump design allows the tool to be used either…

HYDRAULIC HAND PUMPS

The Equalizer range of Hydraulic hand pumps have been designed with a sealed oil reservoir, this allows the pumps to be used in any orientation without the risk of oil spills or air contamination.

The pumps can be used to operate any 700bar (10,000psi) rated hydraulic equipment in most environments including sub-sea.

HP350S Single port single acting sealed hydraulic hand pump

This single port hand pump has been designed with hazard reduction, safety and ease of use in mind. It can be used for operating any 700bar (10,000psi) rated hydraulic equipment with an oil capacity …

HP550S Single port single acting sealed hydraulic hand pump

This single port hand pump has been designed with hazard reduction, safety and ease of use in mind. It can be used for operating any 700bar (10,000psi) rated hydraulic equipment with an oil capacity …

HP1000S Single port single acting sealed hydraulic hand pump

This single port hand pump has been designed with hazard reduction, safety and ease of use in mind. It can be used for operating any 700bar (10,000psi) rated hydraulic equipment with an oil capacity …

Galería

Cerrar menú